Skip to content

How to Fix Dixon Zero Turn Mower Problems

Dixon Zero Turn Mowers are known for their reliability and performance. However, there were reports of problems with the mowers that ranged from the clogged fuel filters to ignition coil problems.

Dixon Zero Turn Mowers are an excellent option for mowing lawns, but they can also have a variety of problems. One of the most common is when your mower won’t start. 

This may be due to a faulty spark plug, clogged carburetor, clogged fuel filter, ignition coil problem, or gas leakage.

Dixon Zero Turn Mower Problems are some of the most common problems that may arise with your mower. This article will discuss the most common Dixon Zero Turn Mower Problems and how to fix them.

Dixon Zero Turn Mower
Dixon Zero Turn Mower

Mower Won’t Start

Dixon zero turn mowers are not an uncommon tool. They are a popular style of lawn mower that is used to cut the grass around a yard, and they are great tools that your lawn can have.

The spark plug is responsible for getting power to the engine. If this spark plug has lost power or isn’t working properly, it will stop the engine from starting. 

The carburetor is there to regulate how much fuel goes into the engine by drawing air in and mixing it with fuel before sending it into the cylinders of the engine. To check your carburetor’s performance, remove it from your mower and turn your mower over onto its side. 

That will allow you to see how well-maintained your carburetor is. You might also have fuel filter problems. A few parts on the engine may have corroded and clogged which would complicate ignition coil problem identification.

Faulty Spark Plug

The spark plug is the heart of an engine. It generates power by igniting the mixture in the cylinder. Carbon builds up on the spark plug and limits its performance. The spark plug needs to be replaced when it gets too worn out.

Faulty Spark Plug
Faulty Spark Plug

Too much carbon on your spark plug can result in an engine that starts but doesn’t turn over or run very well, which can cause serious damage to your mower and decrease its lifespan.

To prevent this from happening, make sure you inspect your mower’s spark plug when the engine does not start and replace them when necessary.

A faulty spark plug can cause your Dixon Zero Turn Mower to not start. There can be a variety of reasons for this such as high carbon build-up on the spark plug, high heat, and low fuel level. 

In order to fix these issues you will need to replace the spark plug and there are specific steps you will need to take.

Clogged Carburetor

The carburetor is one of the most important components of a lawnmower. It is where air and fuel mix together to be combusted and produce power that turns the blades that cut the grass.

The carburetor block on a Dixon Zero Turn Mower is located at the front of the engine, where it receives fuel from the fuel tank and air from the air filter. It has a throttle lever that regulates how much fuel goes into the engine while it’s running. 

The Carburetor cleaner should be applied to areas with debris and debris should be removed with an old toothbrush before applying a new layer of cleaner.

Clean the Carburetor
Clean the Carburetor

Clogged Fuel Filter

When a fuel filter becomes clogged, it will not be able to provide clean fuel to the engine. This will cause the engine not to start. If the clogged filter is not replaced, then the mower will need to be taken in for repairs or a new one bought.

The fuel filter on the Dixon Zero Turn Mower becomes clogged when it gets dirty. This causes the engine to not start. In order to fix this issue, you will need to replace it.

It is important that you change your fuel filter regularly because if they become clogged, they will not be able to provide clean fuel flow which can lead up to the engine not starting or any other problems that can hinder your mowing experience.

Ignition Coil Problem

Ignition coils can develop a problem with the spark plug. In this case, the spark plug is not able to produce enough voltage. This causes the engine not to start.

One of the problems with a Dixon Zero Turn Mower is that when one of its ignition coils is not working, it won’t start even if you replace it with a new one. There are many reasons for this, including debris and external factors.

The best way to test for this problem is to use an ignition tester and manually remove the spark plug wire and watch for the engine to start up again.

Mower Starts But Bad Performance

Dixon Zero Turn Mower Starts But Bad Performance is a disappointing symptom that leaves the consumer frustrated. Dixon Zero Turn Mower Starts But Bad Performance is an issue that can be resolved by contacting a mechanic.

Faults with gas leakage on a lawn mower are typically caused by internal problems and require professional repair work. If you have this issue, please contact your local service center to get the problem fixed.

Gas leakage

Dixon gas mower has an issue when it starts. It would start but there is a noticeable reduction in the performance of the mower. 

The cause is a problem in the carburetor bowl gasket which needs to be replaced to get Dixon Zero Turn Mower back into shape after long usage time. It displaces the gasket and other problems also occur.

Hydrostatic Transmission Problems

Dixon Zero Turn Hydrostatic Transmissions are a popular lawn and garden tool. They provide a smooth ride for the lawn cutter and make it easier to reach places that may not have enough flat ground. 

However, they can cause some problems if you don’t keep them in good condition. One of the most common problems with these transmissions is that they leak air. When the hydro fluid gets contaminated with air, it becomes impossible to change the hydro fluid on your own.

So you’ll need to take it in for maintenance or even replace it completely if you want to do the repair yourself.

The most important step to make sure that your machines are not going to experience this problem can be found in routine checking and maintenance of your machines. These are no shortcuts for the problems.

Won’t Move

John Deere X300 Lawn Tractor owners may have a problem with not being able to move backwards or forwards. This might be caused by the engine still being on, and you should first check the belt for damage before replacing it. 

If you find the belt is broken then replace it with a new one. It will solve the problem.

Dead batteries

Dixon has been manufacturing their zero turn mowers for decades and it can be argued that this is because of their long-lasting batteries. But as time passes, the batteries will start to dying faster than expected. 

It means the battery cells have passed their age. It’s time to replace the batteries.

Smoke Problem

Dixon Zero Turn Mower is a popular product among commercial users. It is designed to give the user a large area of freedom when mowing, which explains why it’s one of the most used products in the world. 

Lawn Mower Smoking
Lawn Mower Smoking

However, one major drawback of this particular model is its tendency to produce black smoke sometimes it can even produce white smoke too. One possible cause for this black smoke is that the carburetor does not get enough fuel and the choke gets stuck. For this reason the engine can’t get the air to run smoothly.

Steering Problem

Dixon Zero Turn Mowers are a type of mower that have been around for years. They’re popular because they are easy to use and provide excellent maneuverability.

The steering problem of this mower can occur due to wear and tear of the support assembly. If the support assembly wears out, there might be too much pressure on one side of the wheel and it will be difficult for you to steer the mower in that direction.

Bad PTO Clutch

The PTO clutch is a device that is used to engage or disengage the blades of an engine. It’s usually found on most four-stroke engines. 

Bad PTO Clutch
Bad PTO Clutch

The PTO clutch is designed to engage or disengage the blades of an engine in order for the operator to shift gears or change speeds. Problems with this device can lead to poor engine performance, poor fuel economy, and higher repair costs. 

The problem with this device is that it can lead to a number of problems such as poor fuel economy and higher repair costs. The PTO clutch will get defected after heavy use and the user will have to change it.

Bad PTO Switch

The PTO switch is a vital part of the clutch assembly. It connects the engine’s power to the clutch and provides power for starting, driving and stopping. The clutch assembly is responsible for connecting the engine’s crankshaft to the transmission.

The most common problem with this part is that it doesn’t get enough power to start or stop smoothly. This can cause noise, vibration, and poor fuel efficiency as well as damage to other parts in the car or truck.


We’ve discussed Dixon Zero Turn Mower Problems in the article and how to fix the zero turn mower. It gives you information on what to do if your mower is not working properly.

In conclusion, Dixon Zero Turn Mowers are great for homeowners who don’t have a large lawn but still need a zero turn mower that can easily handle smaller jobs. They are also good for commercial use, such as small lawns in apartment complexes and office parks.

There are a few things that you can do to fix this problem but if these things don’t work then you should contact your local dealer.

We recommend checking the fuel tank and filling it up with fresh fuel if you smell gas. Also, use a fuel stabilizer to prevent gas from evaporating. If you have a problem with your PTO clutch, you can easily replace it or just tighten it up.

Leave a Reply

Your email address will not be published. Required fields are marked *