Skip to content

Find and Solve the Husqvarna Lawn Tractor Hydrostatic Transmission Problems

Husqvarna lawn tractors are known for their durability. Sadly, Husqvarna lawn tractor hydrostatic transmission problems usually happen after a few years of use and are notoriously slow to diagnose.

Husqvarna lawn tractors are equipped with a hydrostatic transmission and pneumatic tires. It’s just a matter of time before your Husqvarna lawn tractor suffers from hydrostatic transmission problems. 

As on all other lawn tractors, it also has problems related to their transmission that are hard to identify at first. Husqvarna lawn tractor hydrostatic transmission problems are common with all makes and models of lawn tractors. 

The best solution is to keep an eye out on your lawn tractor and perform regular maintenance services in order to prevent any major issues.

Husqvarna Lawn Tractor
Husqvarna Lawn Tractor

Reasons for Hydrostatic Transmission Problems in Husqvarna Lawn Tractor

The Hydrostatic Transmission Problem in Husqvarna Lawn Tractor is a common problem that is faced by many users. It is caused by the accumulation of debris in the transmission system. 

The Hydrostatic Transmission Problem in Husqvarna Lawn Tractor can be caused by a number of factors, including the accumulation of debris in the transmission system, or problems with pedals or wires. Hydrostatic drive is also responsible for this issue. 

Hydrostatic Transmission of a Lawn Mower
Hydrostatic Transmission of a Lawn Mower

The problems can be solved by cleaning out debris and replacing worn parts on the transmission system. This article discusses some of the reasons for this problem and possible solutions.

Problems with Hydrostatic Drive

A hydrostatic transmission is a system that transfers power from the engine to the wheels of a vehicle. It is typically used in internal combustion engines and gas-electric hybrids.

Does your Husqvarna lawn tractor experience a drop in speed when driving uphill? This is a common problem with hydrostatic drives. 

The problems with hydrostatic transmissions are mostly experienced when the mower is moving uphill, or if you push the pedal with whatever you need to move it forward.

Faulty Power Supply

When a vehicle has restricted airflow in the system, it is not able to properly lubricate itself and this can lead to faulty operation. An obstacle in the airflow system of the tractor will restrict movements of the wheels. 

Also, disturbed power supply might lead to unexpected forward and reverse movement. This makes it difficult for the driver to operate their vehicle as smoothly as before. 

The manufacturer must ensure that all parts are in good working condition for any after-sales service or repair to be successful.

Pedals Problem will Occur

To keep your lawn mower from moving, you have to engage the clutch in the transmission. The clutch will lock up the spinning blades while you’re moving forward and disengage them while reversing. 

The problem with hydrostatic transmissions is that they leak power and fluid. This can cause a loss of pressure inside the system. With less pressure, there isn’t enough power to engage any of the clutches in your transmission. 

Even if you press down on the pedal all the way to the ground, there could be insufficient pressure in your transmission to engage either of them.

Wire Loops

Hydrostatic transmissions are used to transmit power from the engine to the wheels. As a result of the faulty wire loops in the transmission, hydrostatic transmissions might not perform well. 

This creates a problem for drivers because they may not be able to disengage their transmission and drive away.

Dirt in The Transmission

Hydrostatic transmissions are designed to run in a clean environment. If you operate your tractor in a dirty environment, the inside of the transmission will fill up with dirt and debris over time. 

Faulty Hydrostatic Transmission
Faulty Hydrostatic Transmission

As long as you drive your tractor regularly, this is not a problem. The centrifugal force of the fast-moving impeller forces the debris out of the pump and into the radiator where it can be cooled and disposed of by the engine cooling fan. 

If you let your tractor sit for an extended period of time with no use, however, the dirt inside will dry out and turn to dust, which can then clog up your transmission and cause it to fail. 

The best way to prevent this problem is to keep your lawn tractor in regular use. However, if you do have problems with hydrostatic transmission problems, you can clean out the inside yourself. 

This will allow you to get back to work quickly and save money on costly repairs.

Shifting Problems

Another common problem with a lawn tractor is shifting problems. External temperature plays a role in this. The oil’s viscosity can also affect how well the hydrostatic transmission works. 

In general, check the operator’s manual for any information regarding external temperature and its effects on shifting. Sometimes, shifting can be a result of internal parts that need to be repaired or replaced.

How to Purge Husqvarna Hydrostatic Transmission

Purging the air from the lines will ensure smooth operation and prevent cavitation. Cavitation is when air gets into the hydraulic system of a vehicle and causes your pump to not generate enough pressure to move your lawnmower or other equipment. 

This results in your motor or engine being slow or sluggish. The best way to avoid this is to purge your hydrostatic transmission every month before you use your mower.

Purging the hydrostatic transmission on a Husqvarna lawn tractor is necessary to operate the lawn mower forward and reverse.

The procedure is as follows:

  1. Push the lawn tractor in an open area, such as your driveway, so you do not get stuck in grass or mud.
  2. Lift the attachment lever and secure the transmission in a disengaged position.
  3. Disengage your cutting blades, press the attachment clutch switch and activate the choke to ignite the engine. Reduce the speed of the engine (idling speed).
  4. Warm up the engine by running it at idle speed for a few seconds.
  5. Slowly depress and release the clutch pedal, which allows hydrostatic fluid to flow through the system for a few seconds, then slowly lift motion control forward and reverse for a few seconds.
  6. Turn off the ignition key after this has been completed.
  7. Engage the transmission by setting the motion control lever forward and driving a few meters, then set the motion control lever reverse and drive a few meters until you reach your desired speed again (idling speed).

Troubleshoot the system

The Husqvarna’s hydraulic system is one of the components that make it a great machine. If you take care of it, there won’t be any issues but if it gets damaged, your lawn care can come to a grinding halt. 

The good news is that you can troubleshoot these issues easily. The first thing you need to do is locate the source of the problem. A damaged pump can also cause problems to your system. 

It is better to have a professional mechanic for this. Look for any oil leaks from the fuel filter, hoses and connections, or from the pump itself. If there are no oil leaks, then your next step will be to check the oil level. 

If it is low, then fill it up with the required amount of oil. You may also want to check for any damage on the pump cooling fins with a brush or compressed air. If you find any damage, you might need to replace the fins immediately.


In conclusion, Husqvarna lawn tractors offer hydrostatic transmission systems as part of their upgraded features that can be beneficial in some respects. However, they also bring with them the added headache of possible problems and repairs that might need to be made. 

If you are looking for a solution to the problems with your lawn tractor and want some information on how to fix or maintain your Hydrostatic Transmission on a Husqvarna lawn tractor, then I think this article has provided you with some good information for this purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *